Total of 24 cues (2 banks).
Designed to ensure remote firework ignition for small/medium shows. Useful when firing from several locations that are far away from each other.
WPS wireless firework firing system allows any combination of WPS pro / WPS tiny or WPS hobby modules.
Supports local script firing via delay or GPS time [in beta], external trigger step firing. Upload your script via WPS mote and deliver whole show from within the module itself.
You can fire several modules or specific banks instantaneously as long as they are on the same channel. How WPS Channels and Banks work
Bi-directional, so will notify WPS mote in case of low battery or low signal strength.
868/915MHz radio module complies with both ETSI and FCC regulations. 2-wire communication via XLR breakout connector [in beta].
GPS assisted timings [in beta]
DC power connector for external 12-24V supply (non battery option) or charging (LiPo battery option).
Several shows on single 14.8V 4S 3000mAh LiPo battery, 40+ hours idle, 10+ hours active.
Simulator feature allows you to test your script by simulating the continuity in all cues.
Resistive continuity check. Active current limiting/short circuit protection for each cue.
Adjustable pulse width with 0.1s intervals depending on electric igniter used.
For instance, commercial e-matches will fire with 0.1s pulse, however, talons might take as long as 2 seconds to fire.
Adjustable LCD brightness.
Intelligent self-test will check that all firing mosfets turn on and off at correct time intervals before every boot-up.
Built into armored ABS case (220 x 180 x 150mm / 8.6x7x6"). Lid can be fully closed, due to the custom cutouts on the sides for wires.
Dust and moisture resistant design. Conformally coated PCB.
Removable antenna that can be easily stored inside the case.
Free future wireless updates using WPS mote (no extra hardware necessary).